When we use and manage the LED injection blowing machine, we need to follow scientific management, correct use of the machine, careful maintenance, regular maintenance, and timely overhaul. In the long run, the service life can be extended to ensure the integrity of the equipment.
1. Before use, check whether the equipment is safe and whether the system is normal, and whether the emergency stop switch is effective.
2. Before starting, check whether the mold installation is firm, whether the cooling water of the machine is normal, and whether the process is normal.
3. It is forbidden for two or more people to operate one device at the same time. When multiple people operate the device and disassemble and assemble the mold, they should coordinate their work to avoid accidents.
4. If the LED injection blowing machine or the mold is abnormal, the equipment must be operated in a manual state, and the hydraulic motor can be turned off to operate.
5. When the machine is running, no part of the body or any item should be placed between any moving parts or moving parts of the injection blower.
6. Do not arbitrarily cancel the function of the safety door for the sake of convenience.
7. Before shutting down, the plastic in the barrel should be cleaned up to prevent the remaining material from being oxidized or degraded by heat for a long time.
8. Every time you change the mold, you should record the parameters of the last set of molds, the temperature set by the mold temperature machine, and the connection method of the mold oil circuit, so that you can refer to the next time you debug this mold.
9. When disassembling the mold mandrel, in order to turn down the stripping plate conveniently: the mold base on the equipment operation screen should be selected to be closed first, so as to prevent the stripping plate from crushing the hand when the motor is started.
10. When disassembling the nozzle: the heating of the hot runner should be turned off to prevent electric shock. When installing the nozzle, first clean the residual waste on the nozzle platen. In order to prevent the leakage of the nozzle platen, do not lock the two platens after installing the nozzle. screw.
Conclusion
Baiya Machinery is one of the leading LED lampshade injection-blowing machine manufacturers in China. We have rich experience in led enclosure plastic machinery. We are committed to the development, research, and production of led enclosures. Our led shell injection-blowing machines are exported to more than 30 countries and regions. Welcome to visit our factory!
Q: Where is your factory?
A: Our factory is located in Yuyao City, Zhejiang Province, which is very close to Ningbo Port. If you fly to Zhejiang, you can visit our factory.
Q:How do tell you about our inquiry?
A:Contact us by email, phone call, fax, or Instant Messenger (Trademanager, MSN, Skype) and let us know your inquiry.
Q: Can you send an engineer to our local place for installation?
A: Yes, If you need it, we will arrange an engineer for you, and we can provide a turn-key project.
